Cisco WIRELESS-G WBP54G User Manual

Page 20

Advertising
background image

15

Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters
Running the Setup Wizard

Wireless-G Bridge for Phone Adapters

15. Connect the power cable of the Bridge to the Power port of the phone adapter or IP phone. Then connect the

power adapter to an electrical outlet.

Make sure the Bridge’s Ethernet and Wireless LEDs are solidly lit or flashing.

Click Next to proceed, or click Back to return to the previous screen.

16. Make sure your cable connections match the cable connections shown on-screen.

Click Next to proceed, or click Back to return to the previous screen.

Figure 4-18: Connect the Attached Bridge Power Cable

to the Phone Adapter Screen

Figure 4-19: Wireless is Now Active Screen

Advertising