Cisco IP/TV 3400 Series - Manual (Page 116)

Appendix C Instructions for Recovering IP/TV Servers
Recovering Cisco IP/TV 3426 and 3427 Servers
C-4
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Step 9 Log in to IP/TV Server as admininstrator.
Step 10 Configure IP/TV Server.
For specific instructions, see Chapter 4, “Setting IP/TV Server Configuration
Parameters.”
Recovering Cisco IP/TV 3427 Server
Caution All data on the boot partition of IP/TV Server will be lost when you follow this
procedure. All media files in the media root directory of IP/TV Server will be
deleted except for the sample.avi file. We therefore recommend that you back up
any files that you require before starting the recovery procedure.
To restore Cisco IP/TV 3427 Server to the shipping configuration, follow these
steps:
Step 1 Insert the disaster recovery CD in the CD-ROM drive.
Step 2 Reboot IP/TV Server.
The product recovery program window appears, with a message that this program
performs hard disk reimaging, installs Windows 2000 and device drivers, and
restores the server to the shipping configuration.
Step 3 Press Enter to continue.
The Terms and Conditions window appears.
Step 4 Enter Yes to accept the prescribed conditions.
The Run the Product Recovery Program window appears.
Step 5 Enter Yes to continue.
The Run the Product Recovery Program (Continue) window appears. A message
in this window alerts you to back up any files that you want to keep.