Cisco IP/TV 3400 Series - Manual (Page 72)

Chapter 3 Installing the IP/TV Server
Installing Cisco IP/TV 3426 Broadcast Server Units
3-10
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Tools and Parts Required
A sliding rail rack-mount kit and cable management assembly is included in your
shipping container accessory box. The rack-mount kit is suitable for mounting
IP/TV 3426 Broadcast Server units in 19-inch (48.26-cm) 4-post equipment racks.
Note A 2-post rack-mounting option contains angle brackets for attaching the chassis
to a 2-post rack.
You need the following parts and tools to install the IP/TV Server in a rack:
• Flat-blade screwdriver
• Phillips screwdriver
• One rack-mount kit
• Documentation
Figure 3-9 shows the items that you need to install the Cisco IP/TV 3426
Broadcast Server in a rack. If any items are missing or damaged, contact your
place of purchase.