Slide number 35, Configuring manually (selecting access points), Make sure the wi-fi indicator blinks – Canon MF8380CDW User Manual
Page 35
Advertising
35
Configuring Manually (Selecting Access Points)
11. Make sure the Wi-Fi indicator blinks.
When the wireless LAN router or access point is detected, the Wi-Fi indicator blinks.
The screen below is displayed for approximately 2 seconds, and then the Wi-Fi indicator will remain solidly lit.
If an error message appears, press [OK] to close the screen, check to make sure that the network key is correct,
and follow the procedure from step 4.
Advertising
This manual is related to the following products: