Slide number 44, Configuring manually (manually entering ssid), Make sure the wi-fi indicator blinks – Canon MF8380CDW User Manual
Page 44
Advertising
44
Configuring Manually (Manually Entering SSID)
13. Make sure the Wi-Fi indicator blinks.
When the wireless LAN router or access point is detected, the Wi-Fi indicator blinks.
The screen below is displayed for approximately 2 seconds, and then the Wi-Fi indicator will remain solidly lit.
*If an error message appears, press [OK] to close the screen and check to make sure that the type of encryption,
method, the network key are correctly entered. If not, enter the network key again.
Advertising
This manual is related to the following products: