Cleaning the platen glass, Cleaning the feeder, Precautions when cleaning the machine – Canon ImageCLASS MF4570DN User Manual

Page 118

Advertising
background image

8-4

M

aint

enanc

e

Cleaning the Platen Glass

Follow this procedure to clean the platen glass and under
surface of the feeder.

1

Turn OFF the power switch and disconnect the

power cord.

2

Open the feeder.

3

Clean the platen glass and the under surface of

the feeder.

(1) Clean the areas with a cloth dampened with water.
(2) Wipe the areas with a soft, dry cloth.

4

Close the feeder.

5

Connect the power cord and turn ON the power

switch.

Cleaning the Feeder

If your documents have black streaks or appear dirty after
scanning using the feeder, the roller inside the feeder may be
dirty. Clean the feeder scanning area and roller.

1

Turn OFF the power switch and disconnect the

power cord.

2

Open the feeder cover.

3

Clean the rollers (A) inside the feeder with a well

wrung out cloth dampened with water, and then
wipe the area with a soft, dry cloth.

(A)

4

Close the feeder cover.

5

Connect the power cord and turn ON the power

switch.

Precautions When Cleaning the Machine

Before cleaning the machine, check the following.
• Ensure no jobs are stored in memory, then turn OFF the

power switch and disconnect the power cord.

• Use a soft cloth to avoid scratching the components.
• Do not use tissue paper, paper towels, or similar materials

for cleaning. They can stick to the components or
generate static charges.

Advertising
This manual is related to the following products: