Canon ImageCLASS MF4570DN - Manual (Page 32)

1-8
Bef
or
e U
sing the M
achine
Specifying values using the navigation keys
Specifying values
Situation Screen example Procedure
When moving through the bars to
adjust levels such as density
Correct Density
- + Press [ ] or [ ] to adjust the level.
When selecting a value to set a
timer
Auto Reset Timer
2 minutes
(0=Off, 1-9)
Numeric key icon
Press [ ] or [ ] to specify the value.
NOTE
Available values
You can specify any value shown in the parentheses at
the bottom of the screen.
When the numeric key icon is displayed on the
screen
You can also enter values with the numeric keys.
“Text Input Method” (P.1-9)
When entering a series of numbers
or letters such as PIN
System Manager PIN
*******
<Apply>
1 2 3 4 5 6 7 8 9 0
<BS>
Press [ ], [ ], [ ], or [ ] to select a number or
character, and then press [OK] to enter the number or
character.
To clear a number or character, select <BS>, and then press
[OK].
NOTE
You can also use the numeric keys
You can also enter values with the numeric keys.
“Text Input Method” (P.1-9)
Confirming the input
To confirm the input:
•
Press [OK].
• When <Apply> appears on the display, press [ ] or [ ] to select <Apply>, and then press [OK].
Returning to the Default Screen
From the menu screen, press [ ] (Menu) to exit the
menu screen and return to the default screen.
NOTE
If you press [ ] (Menu) before you press [OK]
The specified settings will not be saved.