Canon ImageCLASS MF4570DN - Manual (Page 63)

3-9
C
op
ying
The default values of the copy are the function which is
applied when [ ] (Reset) is pressed or the power is turned
ON. You can change the default values to suit your needs.
You can register the following types of settings as the default
values.
• Quantity
• Density
• Original type
• 2-Sided
• Copy ratio
• N on 1
•
Collating
• Sharpness
Keys to be used for this operation
Menu
OK
1
Press [ ] (Menu).
2
Press [ ] or [ ] to select <Copy Settings>, and
then press [OK].
Menu
Preferences
Timer Settings
Copy Settings
Fax TX Settings
3
Press [ ] or [ ] to select <Change Defaults>, and
then press [OK].
Copy Settings
Change Defaults
Correct Density
4
Press [ ] or [ ] to select a setting item, and then
press [OK].
Change Defaults
<Apply>
No. of Copies: 01
Density: 0
Original Type: Text
...
+
-
For details on the settings, see the following items.
“Adjusting the Density” (P.3-4)
“Selecting Image Quality (Copy)” (P.3-4)
“2-Sided Copying (MF4570dn Only)” (P.3-5)
“Enlarging/Reducing Copies” (P.3-6)
“Multiple Documents onto One Sheet (N on 1)” (P.3-6)
“Collating Copies” (P.3-7)
“Emphasize the Outline of an Image (Sharpness)” (P.3-7)
5
After you are finished press [ ] or [ ] to select
<Apply>, and then press [OK].
Change Defaults
<Apply>
No. of Copies: 01
Density: 0
Original Type: Text
...
+
-
6
Press [ ] (Menu) to close the menu
screen.
Changing the Default Values