Checking the toner level, Using the toner saver mode – Canon ImageCLASS MF4570DN User Manual

Page 122

Advertising
background image

8-8

M

aint

enanc

e

Checking the Toner Level

Keys to be used for this operation

OK

Status Monitor/Cancel

1

Press

[

] (Status Monitor/Cancel).

2

Press

[

] or [

] to select <Device Status>, and

then press[OK].

Status Monitor/Cancel

Device Status

Copy Job Status
Fax Job Status/Hist

...

Print Job Status

3

Press

[

] or [

] to select <Toner Gauge>, and

then press[OK].

Device Status
Paper Information

Toner Gauge

Check Counter

The toner level is displayed.

Toner Gauge
OK

NOTE

Displaying the toner level

The toner level is displayed in three stages.

<OK>

<Low>
The message <Prepare toner cartridge.> appears in the display.

<Nearly

Out>

The message <Toner is nearly out.> appears in the display.
For details on solution, see the following.

e-Manual Troubleshooting

Display Messages

4

Press

[

] (Status Monitor/Cancel) to close

<Toner Gauge> screen.

Using the Toner Saver Mode

Set whether or not to conserve toner when copying or faxing.

NOTE

If you want to conserve toner when printing

Set to use [Toner Save] on the [Quality] tab of the printer driver.

e-Manual Print Printing Functions [Quality] Sheet

Keys to be used for this operation

Menu

OK

1

Press

[

] (Menu).

2

Press

[

] or [

] to select <Preferences>, and

then press [OK].

Menu

Preferences

Timer Settings
Copy Settings
Fax TX Settings

3

Press

[

] or [

] to select <Toner Saver Mode>,

and then press [OK].

Preferences
Sound Volume Control
Display Settings

Toner Saver Mode

Paper Feed Method Sw

...

4

Press

[

] or [

] to apply the toner saver mode to

an operation, and then press [OK].

Toner Saver Mode

Copy

Fax

5

Press

[

] or [

] to select <Off> or <On>, and

then press [OK].

Copy

Off

On

Advertising
This manual is related to the following products: