Cisco 3550 - Manual (Page 7)

vii
Catalyst 3550 Multilayer Switch Hardware Installation Guide
OL-6155-01
Preface
Audience
This guide is for the networking or computer technician responsible for installing the Catalyst 3550
multilayer switches. We assume that you are familiar with the concepts and terminology of Ethernet and
local area networking.
Purpose
This guide documents the hardware features of the Catalyst 3550 family of multilayer switches. It
provides a quick setup procedure, describes the physical and performance characteristics of each switch,
explains how to install a switch, and includes basic troubleshooting information.
This guide does not describe system messages that you might receive or how to configure your switch
beyond the basic setup. For more information, see the Catalyst 3550 Multilayer Switch Software
Configuration Guide, the Catalyst 3550 Multilayer Switch Command Reference, the Catalyst 3550
Multilayer Switch System Message Guide, and the release notes on Cisco.com. For information about the
standard Cisco IOS Release 12.2 commands, see the Cisco IOS documentation set on Cisco.com.
Conventions
Command descriptions use these conventions:
• Commands and keywords are in boldface text.
• Arguments for which you supply values are in italic.
• Square brackets ([ ]) mean optional elements.
• Braces ({ }) group required choices, and vertical bars ( | ) separate the alternative elements.
• Braces and vertical bars within square brackets ([{ | }]) mean a required choice within an optional
element.
Notes, cautions, and warnings use these conventions and symbols:
Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in
this manual.