Canon 700 Series - Manual (Page 137)

Receiving Documents Manually 4-4
4
Receiving Documents
Receiving Documents Manually
When you receive documents manually, you can monitor all incoming calls yourself
by picking up the handset every time the machine rings. If you pick up the handset
and determine the call is from another person, start your conversation. If you hear a
slow beep tone, this means the call is a fax transmission. To receive the document,
press [Start], then hang up the handset.
Receiving a Document Manually with the Optional
Handset
Follow this procedure to receive a document manually at the machine.
NOTE
• Before you can use this feature, you must install the optional handset kit or a regular
telephone. (See Chapter 1, “Before You Start Using This Machine,” in the Reference
Guide.) Make sure the document is not set in the automatic document feeder.
• If you have installed the optional Dual-Line Upgrade Kit, if the machine receives a
document on Line 2, it switches to the Automatic Receive mode regardless of whether
<MAN.> for the Manual Receive mode is displayed. (See “How the Two Telephone Lines
Operate,” on p. 1-29.)
1
Open all three one-touch speed dialing panels.
2
Press [Data Registration].
Data
Registration