Canon 700 Series - Manual (Page 201)

Setting Up Polling Sending 8-18
8
Using P
olling
16
Press [ ▼ ] or [ ▲ ] until <5.ERASE AFTER TX> appears
➞ press
[Set].
17
Press [ ▼ ] or [ ▲ ] to display <ON> or <OFF>
➞ press [Set].
18
If you want to set up another polling box, repeat this
procedure from step 7.
19
Press [Stop] to return to the Standby mode.
Scanning a Document into the Memory
for Polling Sending
Follow this procedure to scan a document into a polling box. The document remains
in the polling box so that it can be polled by other fax machines. To use polling
sending, you have to previously create a polling box with ITU-T subaddress/
password.
1
Place your documents on the machine.
For instructions explaining how to place your documents, see “Setting the
Document on the Machine,” on p. 3-3.
➞
<ON>: The document in the polling box is erased after it is sent in response
to a polling request from another fax machine.
<OFF>: The document in the polling box is not erased after it is sent. Select
this setting if you expect that the document will be polled by more
than one fax machine.
➞
Set
Set
Stop