Canon 700 Series - Manual (Page 294)

System Settings 11-31
Summar
y
of Impor
tant Settings
11
Setting Item Description
3.TIME SETUP
OFF*
ON
1.START TIME
EVERYDAY*
SELECT DAYS
2.END TIME
EVERYDAY*
SELECT DAYS
Sets a time for the machine to start the memory receiving operation.
The timer for starting and ending the memory receiving operation is
turned ‘OFF’.
The timer for starting and ending the memory receiving operation is
turned ‘ON’.
Set a specified time to start the memory receiving operation.
Set up to five times everyday to start the memory receiving operation.
Select one or several days to start memory receiving. You can set up
to five times for any of the selected days.
Set a specified time to end the memory receiving operation.
Set up to five times everyday to end the memory receiving operation.
Select one or several days to end memory receiving. You can set up
to five times for any of the selected days.
2. RX PASSWORD Set an RX password to match the ITU-T password of all incoming
documents.
Enter an ITU-T password (up to 20 digits). To receive a
document, this RX password must match the ITU-T password of
the incoming document.
After the RX password has been set, all incoming documents
must have a matching ITU-T password.
3. PHONE NO. CHECK
OFF *
Enables you to prevent sending a document to an unintended
destination. The number you dial is checked with the registered
number. If the numbers match, the document is sent.
The number is not checked.
ON The machine uses the last six digits of the number you dial, and
matches it with the last six digits of the other party’s number
registered on the remote machine. If the numbers match, the
document is sent. Otherwise, the document is not sent.