2.installation verification – Tomei Powered FINAL GEAR KIT FOR HA PRO KIT User Manual
Page 11
Advertising
11
Changing the pinion height washer thickness to change the pinion position will also change the
backlash setting as well. When you adjust the side bearing & pinion height adjustment washers
for setting the preload and backlash please also check the gearing teeth alignment again.
8. Apply liquid gasket (silicon) to the casing when closing the housing up.
9. Reinstall the diff to the car and fill with differential oil (up to the drain plug).
2.INSTALLATION VERIFICATION
Please double check all areas to be sure that there are no signs of any oil leaks.
Heel Contact Point Face Contact Point
The Drive Pinion is brought closer to the ring
Flank Contact Point
Toe Contact Point
Drive ring & Pinion Gear is more apart now.
Advertising