Kit contents, Required tools, Caution – Tomei Powered FINAL GEAR KIT FOR HA PRO KIT User Manual

Page 7: Warning

Advertising
background image

7

KIT CONTENTS

The kit contents are as follows below.

REQUIRED TOOLS

・Nissan workshop manual

・Screw Lock Paste

<Specialized tools>

・Engine Servicing Tools

・Red Lead Primer

・Bearing Puller

・Torque Wrench

・Liquid Gasket/Silicon

・Oil Seal Drift (SST)

・Dail Gauge

・Flange Wrench
・Preload Gauge

<Additional OEM Replacement Parts>

・Pinion Lock Nut

(43262-01P1A)×1

・Pinion Seal

(38189-P0117)×1

・Side Seal

(38342-P9010)×2

・Drive Gear Bolt

(38102-7S000)×10

CAUTION

■ This manual is only to be used as a supplement reference guide only. This manual does not provide the complete
installation procedure. For detailed instructions on the procedure, please refer to the official Nissan workshop
service manual.
■ These products are designed to be used for off road competition purposes only.
■ This product is to be installed by a qualified professional in a fully equipped workshop.
■ This product was designed specifically for the application specified.
■ If the attempt was made to use this product on another engine/car other than specified then you will risk damag

this kit and or the engine or components related with it.
■ Do not use any excessive force when using this product as you risk damaging the product or other parts.
■ This product is to be installed with the appropriate tools and equipment to prevent any engine failures and
injuries or bodily harm.

WARNING

■ Install the product only when the engine & drive train is cold.
■ Due to the nature of the area where the product's) is installed. Please exercise caution to prevent any
possible fire hazards from oil etc.

Drive Pinion(1)

Drive Gear(1)

Collapsible Spacer(1)

Advertising