Trail Tech KICKSTAND 5202-00 User Manual

Kickstand installation, 5201-pk contents

Advertising
background image

010-ELV-136

TRAIL TECH KICKSTANDS

Tech Support: 360-687-4530

[email protected]

5002-YZ/WR/5200-10

‘98-’04 YZ/WR 250F/450F,

‘98-’01 YZ 125/250

5200-PK CoNTENTS:

5002-YZ/WR Kickstand Installed

YAMAHA YZ/WR 250F/450F

‘98-’04

YAMAHA YZ 125/250

‘98-’01

YAmAHA INSTALLATIoN:

LIMITED WARRANTY

Trail Tech inc. warranTS Trail Tech KicKSTanD proDucTS To be free from DefecTS in maTerial anD worKmanShip unDer normal uSe anD if properly

inSTalleD for a perioD of Six monThS from DaTe of purchaSe. if founD To be DefecTive aS menTioneD above, iT will be replaceD or repaireD. ThiS Shall

conSTiTuTe The Sole remeDy of The purchaSer anD The Sole liabiliTy of Trail Tech inc. To The exTenT permiTTeD by law, The foregoing iS excluSive

anD in lieu of all oTher warranTieS or repreSenTaTionS wheTher expreSSeD or implieD, incluDeD any limiTeD warranTy of merchanTabiliTy or fiTneSS.

in no evenT Shall Trail Tech inc. be liable for Special or conSequenTial DamageS.

ImPoRTANT: WEAR EYE PRoTECTIoN WHEN HANGING SPRINGS!

Note: After every ride it is important to check your kickstand thoroughly for the following:

• Loose or damaged bolts • Bent or damaged kickstand leg or bracket • Damaged spring

Damaged or broken parts can result in serious injury! If any part of your stand has become

damaged do not ride the machine! Contact a factory trained technician or Trail Tech directly for service or repairs.

5201-PK CoNTENTS:

1. Attach mounting bracket to frame as shown

below using provided bolts.

2. Hang spring as shown below.

3. Use thread locking compound on the pivot

bolt to ensure it does not back out.

note: bracket for yZ125/y250 02 and up is

different from bracket shown, but will install the

same.

KICKSTAND INSTALLATIoN

YZ125/250 (2-Stroke)

‘02-’04

YZ125/250 (2-Stroke)

‘05-’14

YAmAHA INSTALLATIoN:

1. Attach mounting bracket to frame as shown

below using provided bolts.

2. Hang spring as shown below.

3. Use thread locking compound on the pivot

bolt to ensure it does not back out.

5002-YZ/WR Kickstand Installed

5201-00/5201-10 & 5202-00/5202-10

‘02-’04 YZ125/250 (2-STRoKE)

‘05-’14 YZ125/250 (2-STRoKE)

Advertising