Canon CP710 - Manual (Page 57)

55
Using the Battery Pack (sold separately)
You can print outdoors or at locations without a power outlet by installing the battery pack
NB-CP2L (sold separately).
Proper Usage and Handling of the Battery Pack "Battery (sold separately)" (p. 17)
z The battery pack NB-CP1L (sold separately) cannot be used.
z Do not use the battery pack in products other than those recommended by Canon.
Attaching and Charging the Battery Pack
Use the printer for charging the battery pack.
Install the battery pack NB-CP2L on the printer to charge the battery pack.
1
Remove the battery pack’s
terminal cover.
When the battery pack is not in use,
always store it with its terminal cover
on.
2
Press the battery cover lever
down and remove the battery
cover.
3 Install the battery pack on the
printer.
z Slide the battery pack into place, in the
direction of the arrow, and push it in until
it clicks into place.
To remove the battery pack, push the
battery cover lever down and pull the
battery pack out. Replace the battery
cover afterwards.
Terminal cover
1
2
1 2