Cisco 3.3 User Manual

Page 149

Advertising
background image

4-33

User Guide for Cisco Secure ACS for Windows Server

78-16592-01

Chapter 4 Network Configuration

Network Device Group Configuration

Tip

It may be useful to empty an NDG of AAA clients and AAA servers before you
delete it. You can do this manually by performing the procedure

Reassigning a

AAA Client or AAA Server to an NDG, page 4-31

, or, in cases where there are a

large number of devices to reassign, you can use the RDBMS Synchronization
feature.

Caution

When deleting an NDG, ensure that there are no NARs or other SPCs that invoke
the original NDG. Cisco Secure ACS performs no automatic checking to
determine whether the original NDG is still invoked. If a user authentication
request incorporates an SPC that invokes a non-existent (or renamed) NDG, the
attempt will fail and the user will be rejected.

To delete an NDG, follow these steps:

Step 1

In the navigation bar, click Network Configuration.

The Network Configuration page opens.

Step 2

In the Network Device Groups table, click the NDG that you want to delete.

Tip

If the Network Device Groups table does not appear, click Interface
Configuration
, click Advanced Options, and then select the Network
Device Groups
check box.

Step 3

At the bottom of the page, click Delete Group.

A confirmation dialog box appears.

Step 4

Click OK.

The NDG is deleted and its name is removed from the Network Device Groups
table. Any AAA clients and AAA servers that were in the NDG are now in the Not
Assigned AAA Clients or Not Assigned AAA Servers table.

Advertising