Cisco 3.3 User Manual
Page 260
Chapter 7 User Management
Basic User Setup Options
7-14
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
c.
Select or enter the information in the following boxes:
•
AAA Client—Select All AAA Clients, or the name of a network device
group (NDG), or the name of the individual AAA client, to which to
permit or deny access.
•
Port—Type the number of the port to which to permit or deny access.
You can use the wildcard asterisk (*) to permit or deny access to all ports
on the selected AAA client.
•
Address—Type the IP address or addresses to use when performing
access restrictions. You can use the wildcard asterisk (*).
Note
The total number of characters in the AAA Client list and the Port and
Src IP Address boxes must not exceed 1024. Although Cisco Secure
ACS accepts more than 1024 characters when you add a NAR, you
cannot edit the NAR and Cisco Secure ACS cannot accurately apply
it to users.
d.
Click enter.
The specified AAA client, port, and address information appears in the table
above the AAA Client list.
Step 4
To permit or deny this user access based on calling location or values other than
an established IP address, follow these steps:
a.
Select the Define CLI/DNIS based access restrictions check box.
b.
To specify whether the subsequent listing specifies permitted or denied
values, from the Table Defines list, select one of the following:
•
Permitted Calling/Point of Access Locations
•
Denied Calling/Point of Access Locations