Cisco 3.3 - Manual (Page 538)

Chapter 13 User Databases
Novell NDS Database
13-54
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Before You Begin
The Novell Requestor Software for Novell NDS must be installed on the same
computer as Cisco Secure ACS. If the Novell Requestor Software for Novell NDS
is not on the same computer as Cisco Secure ACS, you cannot complete this
procedure.
To configure Novell NDS authentication, follow these steps:
Step 1 See your Novell NetWare administrator to get the names and other information on
the Tree, Container, and Context.
Step 2 In the navigation bar, click External User Databases.
Step 3 Click Database Configuration.
Cisco Secure ACS lists all possible external user database types.
Step 4 Click Novell NDS.
If no Novell NDS database has yet been configured, the Database Configuration
Creation page appears. Otherwise, the External User Database Configuration
page appears.
Step 5 If you are creating a configuration, follow these steps:
a. Click Create New Configuration.
b. Type a name for the new configuration for Novell NDS Authentication in the
box provided.
c. Click Submit.
Cisco Secure ACS lists the new configuration in the External User Database
Configuration table.
Step 6 Click Configure.
Caution If you click Delete, the Cisco Secure ACS configuration for your Novell NDS
database is deleted.
The NDS Authentication Support page appears. The NDS Authentication Support
page enables you to add a configuration for a Novell NDS server, change existing
Novell NDS server configurations, and delete existing Novell NDS server
configurations.