Cisco 3.3 User Manual
Page 746
Appendix D CSUtil Database Utility
User-Defined RADIUS Vendors and VSA Sets
D-30
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Before You Begin
•
Define a custom RADIUS vendor and VSA set in a RADIUS vendor/VSA
import file. For more information, see
RADIUS Vendor/VSA Import File,
.
•
Determine the RADIUS vendor slot to which you want to add the new
RADIUS vendor and VSAs. For more information, see
.
•
Make sure that regedit is not running. If regedit is running on the
Cisco Secure ACS Windows server, it can prevent Registry updates required
for adding a custom RADIUS vendor and VSA set.
To add a custom RADIUS VSA to Cisco Secure ACS, follow these steps:
Step 1
On the computer running Cisco Secure ACS, open an MS DOS command prompt
and change directories to the directory containing CSUtil.exe. For more
information about the location of CSUtil.exe, see
Step 2
Type:
CSUtil.exe -addUDV
slot-number
filename
where slot-number is an unused Cisco Secure ACS RADIUS vendor slot and
filename is the name of a RADIUS vendor/VSA import file. The filename can
include a relative or absolute path to the RADIUS vendor/VSA import file. Press
Enter.
For example, to add the RADIUS vendor defined in
d:\acs\myvsa.ini
to slot 5,
the command would be:
CSUtil.exe -addUDV 5 d:\acs\myvsa.ini
CSUtil.exe displays a confirmation prompt.
Step 3
To confirm that you want to add the RADIUS vendor and halt all Cisco Secure
ACS services during the process, type Y and press Enter.
CSUtil.exe halts Cisco Secure ACS services, parses the vendor/VSA input file,
and adds the new RADIUS vendor and VSAs to Cisco Secure ACS. This process
may take a few minutes. After it is complete, CSUtil.exe restarts Cisco Secure
ACS services.