Cisco 3.3 - Manual (Page 815)

F-29
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Appendix F RDBMS Synchronization Import Definitions
Action Codes
250 ADD_NDG VN Creates a network device group (NDG) named (VN).
251 DEL_NDG VN Deletes the named NDG.
252 ADD_HOST_TO_NDG VN, V1 Adds to the named AAA client/AAA server (VN) the
NDG (V1).
270 SET_DCS_
ASSIGNMENT — —
271 ADD_NDG_TO_DCS_
MAPPING — —
300 RESTART_PROTO_
MODULES — Restarts the CSRadius and CSTacacs services to apply
new settings.
350 ADD_UDV VN, V1, V2 Adds a RADIUS vendor to the Cisco Secure ACS
vendor database. Vendors added to Cisco Secure ACS
by this method are know as User-Defined Vendors
(UDV).
VN contains the name of the Vendor.
Note Cisco Secure ACS adds “RADIUS(...)” to the
name entered in the Variable Name field. For
example, if you enter the name “MyCo”,
Cisco Secure ACS displays “RADIUS
(MyCo)” in the HTML interface.
V1 contains the user-defined vendor slot number or
AUTO_ASSIGN_SLOT. Cisco Secure ACS has ten
vendor slots, numbered 0 through 9. If you specify
AUTO_ASSIGN_SLOT, Cisco Secure ACS selects
the next available slot for your vendor.
Note If you want to replicate UDVs between
Cisco Secure ACSes, you must assign the
UDV to the same slot number on both
Cisco Secure ACSes.
V2 contains the IANA-assigned enterprise code for
the vendor.
Table F-6 Action Codes for Modifying Network Configuration (continued)
Action
Code
Name Required Description