Sony ICD-R100VTP - Manual (Page 18)

For the first 10 seconds of cue/review, fast playback sound can be heard.
When searching at a higher speed, playback sound will not be heard.
During cue/review, the counter will be displayed, regardless of the
display mode setting (page 34).
Tip
When fast playback is done to the end of the last message, "END" flashes
for 3 seconds and the OPR indicator lights up in green. (You cannot hear
the playback sound.) If you keep pressed while "END" is flashing,
the messages are played back rapidly, and normal playback will start at
the point you release the button.
When "END" stops flashing and the OPR indicator goes off, the unit will
stop at the beginning of the last message.
If the last message is long and you wish to start playback at a later part of
the message, keep pressed to play back the messsage to the end and
then press
i« while "END" is flashing to go back to the desired point.
(For messages other than the last one, go to the beginning of the next
message and play backward to the desired point.)
Playing back a message repeatedly
— Repeat Play
During playback, press ►PLAY/STOP for more than one second.
"
" will be displayed and the selected message will be played back
repeatedly.
To resume normal playback, press ►PLAY/STOP again. To stop
playback, press BSTOP.
Playing the beginning of each message
— Scanning Play
During stop mode, press ►PLAY/STOP for more than one second.
"SCAN" will be displayed in the display window and the first 5 seconds of
each message in the selected file will be played back.
When you find the desired message, press ►PLAY/STOP. The message
will be played back until the end.
Playing back all messages in a file continuously
— Continuous Play
See page 38.
O