Sony ICF-SW7600 User Manual
Icf-sw7600, File сору, Sony
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SONY
LW/MW/SW/FM Stereo
PLL Synthesized Receiver
3-75M55-2a (1)
ICF-SW7600
Operating Instructions
page 2
Before operating the unit, please read this manual thoroughly and
retain it for future reference.
Owner’s Record
The model number is located on the front panel and the serial
number is under the rear stand. Record the serial number in the
space provided below. Refer to these numbers whenever you call
upon your Sony dealer regarding this product.
Model No. ICF-SW7600
Serial No..
Mode d’emploi
PROPERTY Cf lui
NATiOKAL TECHNICAL DEPT.
page 36
Avant de faire fonctionner cet appareil, prière de lire attentivement
ce mode d'emploi et de le conserver à titre de référence ultérieure.
FILE СОРУ
©1989 by Sony Corporation
Document Outline
- SONY
- INFORMATION
- Table of Contents
- Location and Function of Cont rols
- Power Sources
- How to Set the Clock
- How to Change the MW Chan nel Step
- Scan Tuning
- When the station is tuned in
- Frequency band changes continuously
- What is meter band?
- 1 Set POWER/LOCK to POWER.
- 2 Press ON/OFF.
- 4 Press SCAN TUNING START/STOP.
- The frequency range and the tuning Interval of each broadcaat band
- 1 Sat POWER/LOCK to POWER.
- 2 Praas ON/OFF.
- 3 Tuna In a dealred atatlon.
- 4 Preaa one of the PRESET/D1RECT TUNING buttona while keeping ENTER preaaed.
- To check the preset station
- To change the preset station
- How to Tune in Precisely
- How to Tune in SSB Transmis sions
- Having th6 Radio Turned on | Automatically —Timer standby function
- How to Set the Sleep Timer
- ow to Use the Supplied SW Com pact Antenna—For better sw reception
- How to Use an Optional Anten
- Recording Radio Programs
- Specifications
- Troubieshooting Guide
- Th« power is not turned on even if you press the ON/OPF button.
- No display in the time display
- Display is dim.
- Sound is not heard at all.
- Very weak or interrupted sound, or unsatisfactory reception.
- Frequency cannot be input during direct tuning.
- Stations have not been stored.
- No key input is acceptable.
- The preset station cannot be received during preset tuning.
- The radio is not turned on at the timer-setting time.