Adjusting the picture position – Sony CPD-L181 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

6 Press the +/- buttons until the screen color becomes

uniform.

Adjust so that the vertical stripes disappear.

C

3

7

Press the MENU button.

The MENU OSD appears.
If horizontal stripes are observed over the entire screen,
adjust the Phase in the next step.

8 Press the buttons to select PHASE, and press the

MENU button again.

The PHASE OSD appears.

■5(3

MENU

3

PHASE

9

Press the +/- buttons until the screen color becomes

uniform.

Adjust until the horizontal stripes are at a minimum.

10 When you have finished, click

I

end

! on the screen to

turn off the test pattern.

The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button twice.

Customizing Your Monitor

Adjusting the Picture Position

If the picture is not in the center of the screen, press the

AUTO button. If this operation does not work, adjust the
centering as follows.
Once the centering is adjusted, it will be stored in memory
for the current input signal.

1

Start the Utility Disk and display the test pattern.

Do steps 2 and 3 of "Eliminating Flickering or Blurring
Manually."

2

Press the MENU button.

The MENU OSD appears.

MENU

► EXIT

PHASE

imiPiTCH

C3>CENTER

SSZOOM/SMOOTHING

S COLOR
BLANGUAGE

eoPTION

3

Press the buttons to select CENTER, and press

the MENU button again.

The CENTER OSD appears.

CENTER

5(3

MENU

3

►H<

V

I

26 C9

4

Move the picture up, down, left, or right until the

frame at the perimeter of the test pattern
disappears.

For horizontal adjustment, select H using the
buttons and adjust the position using the

+/-

buttons.

+ ... to move the picture right

- ... to move the picture left

CENTER

3

►H<

V

a

26 □

Continued

11

I

Advertising