Adjusting the backlight, Setting the power saving delay time, S <r – Sony CPD-L181 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting the Backlight
If the screen is too bright when you are using the monitor in
a dark room, adjust the backlight.
1 Press the MENU button.
The MENU OSD appears.
13
MENU
► EXIT
PHASE
(m) PITCH
OCENTER
SSZOOM/SMOOTHING
S COLOR
BLANGUAGE
aOPTION
2 Press the buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
■0(3
OPTION
MENU
3 o
Ks
<r
&
pa
W:
5SEC
On: UNLOCK
OSD H POSITION
3 Press the {¡"/{I' buttons to select |-'CD (BACKLIGHT).
-0-3
OPTION
3 ^
s
&
►1901
26
a
<H.: UNLOCK
BACKLIGHT
4
Press the +/- buttons to adjust the light level.
3
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
Customizing Your Monitor
Setting the Power Saving Delay
Time
You can set the delay time before the monitor enters the
power saving mode. See page 17 for more information on
this monitor's power saving capabilities.
1 Press the MENU button.
The MENU OSD appears.
MENU
► EXIT
A.
PHASE
(mlPiTCH
OCENTER
SS200M/SM00THING
S
COLOR
BLANGUAGE
aOPTION
2 Press the buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
■
p
3
OPTION
MENU
3
^
s <r
Ba
O
ti
:
->•4-
5SEC
UNLOCK
OSD H POSITION
3 Press the buttons to select © (PWR SAVE
DELAY).
OPTION
n-
3
3 O
S
ECU
On
■ 60MIN
□
■ 1 M I N
t
■ 5SEC
4-
OFF B
PWR SAVE DELAY
4 Press the +/- buttons to select the desired time.
3
When PWR SAVE DELAY is set to OFF, the monitor
does not go into power saving mode.
'
'
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
I
15