Sony STR-DA30ES User Manual
Fm stereo fm-am receiver, Str-da30es
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Table of contents
Document Outline
- FM Stereo FM-AM Receiver
- Precautions
- To prevent fire or shock hazard, do not expose the unit to rain or moisture.
- Hooking Up the Components 4
- Hooking Up and Setting Up the Speaker System 12
- Location of Parts and Basic Amplifier Operations 22
- Enjoying Surround Sound 26
- Receiving Broadcasts 37
- Other Operations 41
- Additional Information 44
- Unpacking
- Antenna Hookups
- other Hookups
- Multi-Channel Surround Setup
- ■ Rear speaker position (REAR PL.)’^
- ■ Rear speaker height (REAR HGT.)*
- Specifying the speaker types
- 1 Press l/(!) to turn on the receiver.
- 2 Press SET UP to display "SPEAKER SETUP".
- 3 Press the cursor buttons U of ♦).to select the parameter you want to adjust.
- 4 Press the cursor buttons (♦ or ♦) to select setting you desire. The setting is entered automatically.
- 5 Repeat steps 3 and 4 until you have set all of the parameters that follow.
- ■ Front speaker size (FRONT)
- ■ Center speaker size (CENTER)
- ■ Rear speaker size (REAR)
- ■ Sub woofer selection (WOOFER)
- 1 Press SET UP to display "SPEAKER DISTANCE".
- 2 Press the cursor buttons (♦ or ♦) to select the parameter you want to adjust.
- 3 Press the cursor buttons (♦ or to select setting you desire. The setting is entered automatically.
- 4 Repeat steps 2 and 3 until you have set all of the parameters described below.
- 5 Press SET UP to exit the set up mode.
- ■ Front speaker distance (FRONT)
- ■ Center speaker distance (CENTER)
- ■ Rear speaker distance (REAR)
- ■ Distance unit (DIST. UNIT)
- Adjusting the speaker volume
- Before turning on the receiver
- Clearing the receiver's memory
- Checking the connections
- Before You Use Your Receiver
- Front Panel Parts Description
- g] MASTER VOLUME control
- g] MUTING button
- [6] BALANCE control
- [7] SLEEP button
- PHONES jack
- I DISPLAY button
- H DIMMER button
- US SOUND FIELD ON/OFF button
- EQUALIZER button
- GENRE button
- MODE button
- I MULTI CHANNEL DECODING indicator
- M BASS BOOST button
- When you want to enjoy high quality sound
- MEMORY button
- I CURSOR MODE button
- When cursor mode is You can
- FM MODE button
- TUNING +/- buttons
- PRESET TUNING +/- buttons
- SHIFT button
- FM/AM button
- Cursor buttons {♦/♦/♦/♦)
- SET UP button
- CINEMA
- VIRTUAL 3D
- A.F.D.
- Brief descriptions of buttons used to enjoy surround sound
- Selecting a Sound Field
- Understanding the Multi-Channel Surround Displays
- Customizing Sound Fields
- WALL TYPE (WALL)
- 1 Start playing a program source encoded with multi channel surround sound.
- 2 Press CURSOR MODE repeatedly until the SUR indicator lights up.
- 3 Press the cursor buttons (♦ or ♦) to select the parameter you want to adjust.
- 4 Press the cursor buttons (♦ or ♦) to select setting you desire. The setting is entered automatically.
- EFFECT LEVEL (EFFECT)
- REVERBERATION (REVERB)
- LFE (Low Frequency Effect) MIX LEVEL (LFE MIX)
- 1 Start playing a program source encoded with multi channel surround sound.
- 2 Press CURSOR MODE repeatedly until the EQ indicator lights up.
- 3 Press the cursor buttons (4 or ♦) to select the parameter you want to adjust.
- 4 Press the cursor buttons (4 or ♦) to select setting you desire. The setting is entered automatically.
- 1 If the power is on, press l/(!) to turn off the power
- Adjustable parameters for each sound field
- Receiving
- Broadcasts
- This chapter describes how to receive FM or AM broadcasts and how to preset selected stations.
- Direct Tuning
- Automatic Tuning
- Preset Tuning
- Brief descriptions of buttons used to receive broadcasts
- 1 Rotate FUNCTION to select the tuner.
- 2 Press FM/AM to select the FM or AM band.
- 3 Press DIRECT (or D.TUNING).
- 4 Press the numeric buttons to enter the frequency.
- 5 If you've tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception.
- 6 Repeat Steps 2 to 5 to receive another station.
- Automatic Tuning
- 1 Rotate FUNCTION to select the tuner.
- 2 Press FM/AM to select the FM or AM band.
- 3 Press TUNING + or TUNING-.
- 4- To continue scanning, press TUNING + or TUNING - again.
- Presetting radio stations
- 1 Rotate FUNCTION to select the tuner.
- 2 Tune in the station that you want to preset using Automatic Tuning (this page).
- 3 Press MEMORY.
- 4 Press SHIFT to select a memory page (A, B or C).
- 5 Select a preset number by pressing PRESET TUNING + or PRESET TUNING-.
- 6 Press MEMORY again to store the station.
- 7 Repeat Steps 2 to 6 to preset another station.
- Timing to preset stations
- This chapter describes how to receive FM or AM broadcasts and how to preset selected stations.
- other
- Operations
- Brief descriptions of buttons and controls that appear in this chapter
- Indexing Preset Stations and Program Sources
- Recording
- Using the Sleep Timer
- Adjustments Using the SET UP Button
- Troubleshooting
- There's no sound or only a very low-level sound is heard.
- The left and right sounds are unbalanced or reversed.
- Severe hum or noise is heard.
- No sound is heard from the center speaker.
- No sound or only a very low-level sound Is heard from the rear speakers.
- Recording cannot be done.
- Radio stations cannot be tuned in.
- The surround effect cannot be obtained.
- No picture or an unclear picture appears on the TV screen or monitor.
- The video image on the TV screen or monitor does not correspond to the selected component.
- The remote does not function.
- Reference sections for ciearing the receiver's memory
- Specifications
- Glossary
- Tables of Settings Using the CURSOR MODE and SET UP buttons
- Index
- Operations
- Precautions