Settings for sound (audio setup), Setting for the signal to the digital output – Sony DVP S530D User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Settings for Sound (AUDIO SETUP)
3
IC
VI
fi)
3
a
>
a
c'
VI
3
№
3
Setting for the Signal to the Digital
Output
When you select "ON," set "DOLBY DIGITAL" and
"DTS."
Switches the methods of outputting audio^ignals when
you connect a digital component such as a receiver
(amplifier) having a digital connector, an audio
component having a built-in DTS decoder, a DAT or MD
via the DIGITAL OUT OPTICAL or COAXIAL connector
using an optical or coaxial digital connecting cord. For
details on the connection, see page 11.
AUDIO SETUP
AUDIO ATT:
OFF
AUDIO DRC:
STANDARD
TRACK SELECTION:
OFF
DOWN MIX:
DOLBY SURROUND
DIGITAL OUT.
ON
DOLBY DIGITAL:
D-PCM
DTS:
OFF
To set, press BBSS. thenletiiEHJ.
To quit, press ISETUPJ._____________
You
to
■DOLBY DIGITAL
Selects output Dolby Digital (AC-3) signals via the
DIGITAL OUT OPTICAL and COAXIAL connectors.
cannot select this item when vou set "DIGITAL OUT
"OFF."
• D-PCM (Downmix PCM): when you play the Dolby
Digital (AC-3) sound tracks, the output audio signals
are mixed dowm to 2 channels. With the settings of the
item "DOWTsi MIX" in "AUDIO SETUP," you can select
whether the signals conform to Dolby surround (Pro
Logic) or not.
• DOLBY DIGITAL: when the player is cormected to an
audio component whth a built-in Dolby Digital (AC-3)
decoder.
Note
If the player is connected to an audio component lacking a
bvult-in Dolby Digital (AC-3) decoder, do not set "EXDLBY
DIGITAL" in "AUDIO SETUP" to "DOLBY DIGITAL."
Otherwise, when you play the Dolby Digital (AC-3) sound
track, a loud noise or no sound will come out from the
speakers, affecting your ears or causing the speakers to be
damaged.
■DTS
Selects output DTS signals via the DIGITAL OUT
OPTICAL and COAXIAL connectors. You cannot select
this item when you set "DIGITAL OUT" to "OFF."
• OFF: when the player is connected to an audio
component lacking a built-in DTS decoder.
• ON: when the player is connected to an audio
component having a built-in DTS decoder.
Note
Select the setting correctly. Otherwise, no sound or strange
sound will come out from the speakers, affecting your ears or
causing the speakers to be damaged.
Do not play the DTS sound tracks without
connecting the player to an audio component
having a built-in DTS decoder. You cannot hear
the DTS sound unless you connect the player to
an audio component having a built-in DTS
decoder.
When you play the DTS sound track on a CD, a
loud noise will come out from the LINE OUT
(AUDIO 1, 2), 5.1CH OUTPUT (FRONT L/R) and
PHONES connectors, affecting your ears or
causing the speakers or headphones to be
damaged.
When you play the DTS sound track on a DVD,
no sounds will come out from the LINE OUT
(AUDIO 1, 2), 5.1CH OUTPUT (FRONT L/R) and
PHONES connectors.
Notes on playing the DTS sound tracks on a CD
• Do not play the DTS sound tracks without connecting the
player to an audio component having a built-in DTS decoder.
The player outputs the DTS signal via the DIGITAL OUT
OPTICAL and COAXIAL connectors even if "DTS" in "AUDIO
SETUP" is set to "OFF" in the setup display, affecting your ears
or causing the speakers to be damaged.
• The DTS indicator on the front pane! does not light up even if
the player outputs DTS signal via the DIGITAL OUT OPTICAL
and COAXIAL connectors.
• Set the sounds to "STEREO" when you play the DTS sound
tracks on a CD. (See "Changing the Sounds" on page 29.) If
you set the sounds to "1/L" or "2/R," no sounds will come out
from the DIGITAL OUT OPTICAL and COAXIAL connectors.
un