Speaker set up – Sony DVP S530D User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Speaker Set Up
Notes on playing the DTS sound tracks on a DVD
• No sounds will come out from the LINE OUT (AUDIO 1, 2)
and PHONES connectors.
• If the player is connected to an audio component lacking a
built-in DTS decoder, do not set "DTS" in "DIGITAL OUT" to
"ON" in the setup display. Otherwise, when you play the’DTS
sound track, a loud noise will come out from the speakers,
affecting your ears or causing the speakers to be damaged.
• When you set "DTS" in "AUDIO SETUP" to "OFF," no sound
will come out from the DIGITAL OUT OPTICAL and
COAXIAL connectors even it you play DTS sound tracks on
DVDs.
• The DTS indicator on the front panel display lights up when
you play DTS sound tracks.
Select "SPEAKER SETUP" after pressing SET UP.
To obtain the best possible surround sound, first specify
fhe size of speakers you have connecfed and their distance
from your listening position, then set the balance and
level. Then use the test tone to adjust the speaker
volumes to the same level.
For the speaker hook ups, see pages 12 to 13.
SPEAKER SETUP
SIZE;
DISTANCE;
BALANCE:
LEVEL;
TEST TONE;
FRONT:
CENTER:
REAR:
SUBWOOFER
OFF
URGE
URGE
URGE
YES
To set, press S®SS, thenlENTERj.
To quit, pressISETUPi.________________
■SIZE
Selects the size of the speakers to be connected.
• FRONT
— LARGE. Normally select this.
— SMALL: When the sound cracks or the effects of the
surround is difficult to hear, select this. This
activates the Dolby Digital (AC-3) bass redirection
circuitry and outputs the bass frequencies of the
speaker from subwoofers.
• CENTER
— NONE: If you will not connect a center speaker,
select this.
—LARGE; Normally select this.
— SMALL: When the sound cracks, select this. This
activates the Dolby Digital (AC-3) bass redirection
circuitry and outputs the bass frequencies of the
speaker
from some
other speakers .
• REAR
— NONE: If you will not connect a rear speaker, select
this.
— LARGE: Normally select this.
— SMALL: When the sound cracks or the effects of the
surround is difficult to hear, select this. This
activates the Dpjby Digital (AC-3) bass redirection
circuitry and outputs the bass frequencies of the
speaker from some other speakers .
• SUBWOOFER
— NONE: If you do not connect a subwoofer, select
this. This activates the Dolby Digital (AC-3) bass
redirecbon circuitry and outputs the LEE signals
from the front speakers.
— YES: If you connecf a subwoofer, select this to output
the LEE (low frequency effects) channel from the
subwoofer.
1/1
(D
3
(Q
W!
01
3
a.
>
a.
c'
in
3
3
51