Sony DVP S530D - Manual (Page 54)

Controlling the TV or the AV Receiver (Amplifier) with the Supplied Remote
When you set the TV/DVD •RECEIVER switch to TV, you
can control your TV using the keys below.
(/)
Ф
3
Ю
V)
3
a
>
&
c
VI
3
№
3
TV/
DVD*RECEIVER
switch
Number buttons/
ENTER
l/Cl^POWER)
TV/VIDEO
-TV CH
-VOL
ENTER
By pressing You can
I /Cl) (POWER) Turn the TV on or off
TVV VIDEO Select the input source for the TV
VOL Adjust the volume of the TV
TVCH Change the channel of the TV
Number buttons
and ENTER Select the channel of the TV
Note
Depending on the TA', \-ou mav not be able to control vour TV or
to use some of the buttons above.
Controlling an AV receiver (amplifier)
with the remote
1 Slide the TV/DVD*RECEIVER switch to
DVD«RECEIVER.
2 Hold down l/(l) (POWER), and enter your AV
receiver's manufacturer's code (see the table
below) using the number buttons. Then release
l/(l) (POWER).
Manufacturer Code number
Sony 91 (default), 88,
89
Denon 84, 85, 86
Kenwood 92,93
Onkyo 81, 82, 83
Pioneer 99
Sunsui 87
Technics 97,98
Yamaha 94, 95, 96
- 90’
* By setting the code number 90, you can adjust
the volume of the TV even if the T\'/
DVD* RECEIVER switch is on the
DVD’RECEIVER side, if you do not control an
AV receiver (amplifier) with the remote.
Code numbers of controllable receivers
(amplifiers)
If more than one code number is listed, tr}' entering them
one at a time until you find the one that works with your
receiver (amplifer).
You can also change the sound volume of the AV receiver
(amplifier) using VOL.
Note
Depending on the Ai' гессг.чт 'amph.her
control vour AV receiver lamplifier).