Sony DVP S530D - Manual (Page 7)

Getting
Started
This section describes how to hook up
the CD/DVD player to a TV (with
audio/video input jacks) and/or an
AV receiver (amplifier). You cannot
connect this player to a TV which
does not have a video input
connector. Be sure to turn off the
power of each component before
making the connections.
Unpacking
Check that you have the following items:
• Audio/video/S-link connecting cord (1)
• S video cord (1)
• Remote commander (remote) RMT-D108A (1)
• Size AA (R6) batteries (2)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two Size AA (R6) batteries by matching the + and ■
on the batteries. When using the remote, point it at the
remote sensor IS on the player.
Q
ID
I*
3
' lO
V) r*
t)
ID
a
You can control TVs and AV receivers using the supplied
remote
See page 53.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or lighting
apparatuses. Doing so may cause a malfunction.
• If you will not use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery'
leakage and corrosion.
7