Sony DVP-S550D - Manual (Page 63)

Sound
There is no sound.
^ Check that the player is connected securely.
^ The audio connecting cord is damaged. Replace it
with a new one.
Make sure you connect the player to the audio
input connectors on the receiver (amplifier), (page
10 )
Make sure vou turn on the TV and the receiver
(amplifier).
^ Make sure you select the appropriate position on
the receiver (amplifier) so that vou can listen to the
sound from the player.
The player is in pause mode or in Slow-motion
Play mode. Press O to return to normal play
mode.
^ Fast forward (FFl or FF2) or fast rei'erse (FRl or
FR2) is performed. Press O to return to normal
play mode.
^ Check the speaker connections and settings, (page
12, 58) Refer to the operating manual of your
receiver (amplifier).
When vou plav the Dolbv Digital (AC-3) sound
tracks and attempt to output from the DIGITAL
OUT connectors, set "DIGITAL OLT" to "ON" in
the setup display. Otherwise no sound will come
out trom the DIGIIAL OUT connectors, (page 5o)
When vou play the DTS sound tracks, no sound
will come out from the LINE OLTT, 5.1CH
OUTPUT (FRONT L/R) and PHONES connectors,
(page 56)
Sound noise is heard.
Clean the disc.
^ When you play the DTS sound tracks on a CD,
soimd noise will come out from the LINE OUT
5.1CH OUTPUT (FRONT L/R) and PHONES
connectors, (page 56)
Sound distortion occurs.
In the setup display, set "AUDIO ATT" in "AUDIO
SETUP" to "ON."
The sound loses stereo effect when you play a
VIDEO CD or a CD.
Set "AUDIO" to "STEREO (1/L 2/R)" in the
Control Menu display, (page 31)
Make sure you connect the player appropriately.
(page 8, 10, 12)
The surround effect is difficult to hear when you
are playing a Dolby Digital (AC-3) sound track.
^ Check the speaker connections and settings, (page
12, 58) Refer to the operating manual of your
receiver (amplifier).
Depending on the DVD, the output signal may not
be the entire 5.1 channel but monaural or stereo
even if the sound track is recorded in Dolby Digital
(AC-3) format.
The sound comes from the center speaker only.
^ Depending on the disc, the sound may come from
the center speaker only.
^ Set "VIRTUAL 3D SURROUND" to "OFF" in the
Control Menu display, (page 34)
Operation
The remote does not function.
Remov^e anv obstacles betw'een the remote and the
player.
Use the remote near the player.
Point the remote at the remote sensor 0 on the
plaver.
Replace all the batteries in the remote with new
ones if they are weak.
If vou operate the plaver from the TV using the S-
link conncchon, connect the S-link plug to the S-
Imk connector of the TV. (page 8)
The disc does not play.
There is no disc mside ("Insert drsc." appears on
the T\' screen).
Insert a disc.
^ In.sert the disc correctly with the playback side
facing down on the disc tray.
Clean the disc.
The player cannot play CD-ROMs, etc. (page 5)
Insert a DVD, a VIDEO CD, or CD.
^ Check the region code of the DVD. (page 4)
Moisture has condensed inside the player. Remove
the disc and leave the player turned on for about
half an hour, (page-6)
The player does not play from the beginning
when playing a disc.
^ Repeat Play, Shuffle Play or Program Play has been
selected. Press CLEAR, (page 36 to 40)
^ Resume Play has been selected.
Press ■ on the front panel or on the remote before
you start playing, (page 18)
^ A title menu or a DVD menu automatically
appears on the T\' screen when vou plav vour
DVD, or a setup dispLu auioniaticallv appears on
the T\' scri'en when vou plav \’our VIDEO CD
will I ; ’lit tunction> 6.3
>
a
a.
o'
3
EL
3 «4«
o
3
o’
3