Removing the cover – Sony PCV-230 User Manual
Page 128
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Removing the Cover
To insert an add-in board, add memory, or replace the lithium battery,
you need to open your Sony PC. You must remove the panels in a specific
order: the left side panel, the rear panel, and the I/O bracket.
^ When replacing the lithium battery, you must perform some initial steps before removing
the cover. See "Replacing the Lithium Battery” on page 129 for details.
To remove the left side panel
1
Push the rear latch to release the left side panel.
2
Slide the panel back until it stops.
3
Pull the panel straight out to remove it.
120
Advertising
This manual is related to the following products: