Settings for sound (audio setup), Setting for the signal to the digital output, Downmix – Sony DVP-C650D User Manual

Page 58: Digital out, Dolby digital

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Settings for Sound (AUDIO SETUP)

V)

(0

3

(fi

Ul

ID

3

a

>

a
c'

VI

r*

3

3

■ DOWNMIX*

Switches the mixing down methods when von plav a

DVD on wliich the sound in Dolb\- Digital format is
recorded.

• DOLBY SURROUND: when the plaver is connected to

an audio component tliat conforms fo Dolb\' Surround.

(Pro Logic)

• NORMAL: when the plaver is connected to a normal

audio component.

The sotting affects the following connectors: *

-LINT OUT (AUDIO 1,2) connectors

DICITAl OUT (OPTICAL, COAXl.AL) connectors.

■ DIGITAL OUT

Selects output signals via the DIGITAL OUT OPTICAL
and COAXIAL connectors.

• ON: Normally select this position. When you select

“ON," set "DOLBY DIGITAL" and "DTS." For details
on setting them, see "Setting for the Signal to the Digital
Output "

• OFF: when the player does not output the sound signals

via DIGITAL OUT OPTICAL and COAXIAL connectors,
if you selecf this position, the influence of the digital
circuit upon the analog one is minimum.

Notes

• When you play the sound tracks with 96 kHz sampling

frequency, the output signals from the DIGITAL OUT

(OPTICAL, COAXIAL) are converted to 48 kHz (sampling

frequency). When the signals are output from LINE OUT

(AUDIO 1, 2) connector, sampling frequency stays at 96 kHz.

and the output signals are converting to analog signals.

• When you select "OFF," You cannot set "DOLBY DICITAL.”

and "DTS."

Setting for the Signal to the Digital
Output

When vou select "ON," set "DOLBY DIGITAL" and

"DTS."

Switches the methods of outputting audio signals when
vou connect a digital component such as a receiv er

(amplifier) having a digital connector, an audio
component having a built-in DTS decoder, a D.AT or MD
via the DIGITAL OUT OPTICAL or COAXIAL connector
using an optical or coaxial digital connecting cord. For
details on the connection, see page 11.

AUDIO SETUP

AUDIO ATT:

OFF

AUDIO FILTER:

SHARP

AUDIO DRC:

STANDARD

TRACK SELECTION:

OFF

DOWNMIX: DOLBY SURROUND
DIGITAL OUT:

ON

DOLBY DIGITAL:

D-PCM

DTS:

OFF

To set, Dress

SSHIIS,

thenlENiEfiJ.

To quit, pressiSETUPl.

■ DOLBY DIGITAL

Selects output Dolby Digital signals via the DIGITAL OUT
OPTICAL and COAXIAL connectors. You cannot select

this item when you set "DIGITAL OUT" to "OFF."

• D-PCM (Downmix PCM): when you play the Dolby

Digital sound tracks, the output audio signals are mixed
down to 2 channels. With the settings of the item
"DOWNMIX" in "AUDIO SETUP," you can select
whether the signals conform to Dolby Surround (Pro
Logic) or not.

• DOLBY DIGITAL: when the player is connected to an

audio component with a built-in Dolby Digital decoder.

Note

If fhc pkivcr is connected to an audio cornponent lacking a

built-in DoIb\' Digital decoder, do not set "DOLBY DICITAL"

in "AUDIO SETUP" to "DOLBY DICITAL," Otheru ise, when

vou play tire Dolbv Digital sound track, a loud noise or no

sound v\ ill conu' out froirr the speakrTs, affecting vour ears or

causing the speakers to be damaged.

58

Advertising