Document Outline

• Contents
• Introduction
• How to Use This Manual
• Printer Features
• Parts and Functions of the Printer
  • Front View
  • Rear View
  • Inside the Printer
  • Operation Panel
• Connecting and Switching On the Printer
  • About the Printer Cable
  • Notes on Handling the USB Interface
  • Connecting the Power Cord
  • Switching the Printer On
  • Switching the Printer Off
• Printing on Paper and Other Media
  • Media Size You Can Use with the Printer
  • Media Type You Can Use with the Printer
  • Media Type You Cannot Use with the Printer
  • Loading Paper and Other Media
  • Setting the Paper Thickness Lever
  • Printing Area
  • Notes on Handling Media
  • Using Plain Paper or High Resolution Paper
  • Using Envelopes
  • Using Transparencies
  • Using Back Print Film
  • Using Glossy Photo Paper
  • Using High Gloss Photo Film
  • Using Glossy Photo Cards
  • Using Banner Paper
  • Using T-Shirt Transfers
• Using the BJ Cartridges
  • BJ Cartridges You Can Use with the Printer
  • Notes on Handling the BJ Cartridges
  • Switching and Storing the BJ Cartridges
• Setting the Printer Driver
  • Printer Driver Basics
  • Preparing and Executing a Print job
  • Selecting the Print Mode
  • Selecting the BJ Cartridge
  • Selecting the Media Type and Paper Size
  • About Detailed Print Settings
  • Using On-line Help for Printer Driver
• Printing Photographs
  • Tips for Printing Photographic Images (I)
  • Tips for Printing Photographic Images (II)
  • About Photo Optimizer
• Using the Scanner
  • Scanner Driver Basics
  • Installing the Scanner Cartridge
  • Using the White Calibration Sheet
  • Using the Scanning Holder
  • About the Scanning Area
  • Launching IS Scan
  • Changing the Scanning Mode
  • Saving the Image
  • Using On-line Help for IS Scan Software
• Routine Maintenance
  • Prolonging the Service Life of the Printer
  • BJ Cartridge Maintenance
  • When to Replace the BJ Cartridge
  • Printing a Nozzle Check Pattern
  • Cleaning the Print Head
  • Replacing the Ink Tanks
  • Replacing the BJ Cartridge
  • Aligning the Print Head
  • Cleaning the Printer
  • Cleaning the Paper Feed Rollers
  • Transporting the Printer
• Troubleshooting
  • Printout is Unsatisfactory
    • Colour document printed in monochrome
    • Colours not clear
    • Printed and on-screen colour do not match
    • Meaningless characters, symbols printed
    • Printed text rotated 90 degrees
    • Printing in top left corner
    • Text cut off at bottom right corner, right edge or bottom edge
    • Text or image reversed (mirrored)
    • Enlarged/reduced printing not correct
    • Single file page prints over two or more pages
    • Colours streaked or wrong
    • Straight lines are broken
    • Printed pages curled
    • Backs of pages stained with ink
    • Ink blurred
    • Printed surface scratched
    • White streaks visible
    • Colours streaked or uneven
    • Last part of print job not printing
    • Characters and figures notched / gradation streaked or unnatural
  • Printer Does Not Start or Stops in Mid-job
    • Printer does not switch on
    • Print job does not start
    • Printings halts
    • Printing starts but nothing printing
    • Cartridge holder does not move to the left side
  • Paper Jams or Does Not Feed
    • Paper does not feed from auto sheet feeder
    • Envelopes do not feed
    • Paper skewing during feeding
    • Multiple sheets feed together
    • Paper jam
  • The POWER Lamp Flashes Orange
  • An Error Message Appears
    • Error writing to LPT1 or USBPRN
    • Application error, General protection fault
    • Other error messages
  • Scanner Problems
    • Scanning result is unsatisfactory
      • Scanned image blurred or distorted
      • Scanned image is of uneven quality
      • White portion becomes greyish
      • Parts of an image are missing or not aligned properly
      • Image contains unexpected colors,or is too light or too dark
    • Cannot be used with TWAIN-compatible application program
      • Cannot launch IS Scan from within the TWAIN-compatible graphics application program
      • Cannot transfer to TWAIN-compatible graphics application program
    • Other scanner problems
      • Cannot install the scanner driver
      • Does not launch with default settings
      • Improper colours are displayed in the dialogue box
      • Scanning is too slow
      • Communication error occurs
      • An error message appears
  • Other Problems
    • Cannot install the printer driver
    • BJ Status Monitor does not open
    • Cannot execute background printing
  • Avoiding Problems
    • Setting Colour Adjustment
    • Adjusting Brightness (gamma curve coefficient)
    • Adjusting Output Style
    • Checking the printer and computer connection
    • Setting the BJC-3000 as default printer
    • Cancelling ECP
  • Before you Call for Help
    • Narrowing down the problem
    • Checking the printing environment
• Specifications
• Index
  • A to B
  • C
  • D to G
  • H to I
  • L to M
  • N to P
  • Q to R
  • S to T
  • U to W