Sony SPP-A973 - Manual (Page 48)

Storing a number of the Caller ID list into
the Phone Directory
Using the Caller ID list (continued)
1 Display the name and phone number you want
to store from the Caller ID list (see page 44).
2 Confirm the number and press Jog Dial.
3 Turn Jog Dial up to make "PGM" flash and
press Jog Dial.
The cursor flashes at the end of the name.
Enter or change the name, if necessary (see page
26).
SMITH JOHN
1-20H 23-4567
,^:=fGM ERASE
MI-123-4567
"“08 TOW«, W.-53
SMITH
12011234!
Press Jog Dial.
The cursor flashes at the end of the phone
number.
Enter or change the phone number, if necessary
(see page 26).
SMITH JOI
12011234!
5 Press Jog Dial again.
You will hear a long confirmation beep and the
name and number are stored.
Notes
• tXi not allow more than 20 seconds to elapse between each step of the
priKodure.
• If the number displayed in step 1 is not the one you should call back, you can
change the number of digits of the phone number as described on page 49.
• If the phone is connected to a Private Branch Exchange (PBX), you may need
to add an outside line access digit.
48^ Caller 10 Features