Cisco 3030 - Manual (Page 59)

B-3
Cisco Catalyst Blade Switch 3030 Hardware Installation Guide
OL-8389-01
Appendix B Connector and Cable Specifications
Connector Specifications
SFP Module Ports
The switch uses SFP modules for fiber-optic and copper uplink ports. Refer to the release notes for a list
of supported SFP modules.
Figure B-2 Fiber-Optic SFP Module LC Connector
Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments. Statement 1051
Figure B-3 Copper SFP Module RJ-45 Connector
Console Port
The console port uses an 8-pin RJ-45 connector, which is described in Table B-1 and Table B-2 . The
supplied RJ-45-to-DB-9 adapter cable is used to connect the console port of the switch to a console PC.
You need to provide a RJ-45-to-DB-25 female DTE adapter if you want to connect the switch console
port to a terminal. You can order a kit (part number ACS-DSBUASYN=) containing that adapter from
Cisco. For console port and adapter pinout information, see
Table B-1 and Table B-2 .
58476
60915
2 3 1 4 5 6 7 8 Pin Label
1
2
3
4
5
6
7
8
TP0+
TP0-
TP1+
TP2+
TP2-
TP1-
TP3+
TP3-