Selecting a sound field, Sound field buttons, 1 press mode – Sony STR-DE635 User Manual

Page 28: To turn the sound field off

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Selecting a Sound Field

SUR Jog dial

Brief descriptions of buttons used to
enjoy surround sound

LEVEL button:

Press to light and customize the level

parameters.

SUR button:

Press to light and customize the surround

parameters in the current sound field.

EQ button:

Press to light and customize the equalizer

parameters in the current sound field.

Cursor buttons (<C

/ »: Use to select parameters after

pressing the LEVEL, SUR, or EQ buttons.

Jog dial:

Use to adjust parameters and select sound fields

(etc.).

SOUND FIELD buttons:

A.F.D. button:

Press to set the receiver to

automatically detect the type of audio signal being
input and perform proper decoding (if necessary).

MODE button:

Press to activate the sound field

selection mode.

2CH button:

Press to output sound from only the

front (left and right) speakers.

EQUALIZER button:

Turns the equalizer on or off.

You can onjo\' surround sound simplv by selecting one of
the pre-programmed sound fields according to the
program vou want to listen to.

1

Press MODE.

The current sound field is indicated in the display.

2

Turn the jog dial or press the cursor buttons (< or

» to select the sound field you want.

See the table starting on page 29 for information on
each sound field.

To turn the sound field off

Press A.F.D. or 2CH (page 24).

? The receiver memorizes the last sound field selected for each

program source (Sound Field Link)
Whenever you select a program source, the sound field that was
last applied is automatically applied again. For example, if you
listen to CD with STADIUM as the sound field, change to a
different program source, then return to CD, STADIUM will be
applied again. With the tuner, sound fields are memorized
separately for AM, FM, and all preset stations.

9 You can identify Dolby Surround-encoded software by

looking at the packaging

Use discs with the PR^rrri' logo. In order to enjoy Dolby Digital
(AC-3) playback you must use discs bearing this logo.

Note
When using sound fields, do not select both speakers (A-»-B) with
the SPEAKERS selector.

28

Advertising