Sony STR-DE635 - Manual (Page 4)

Hooking Up
the
Components
This chapter describes how to connect
various audio and video components
to the receiver. Be sure to read the
sections for the components you have
before you actually connect them to
the receiver.
Unpacking
Chock that \’ou received the tollowing items with the
remote;
• F'M wire antenna (n
• AM loop antenna (1)
• Remote commander RM-PP402 (remote) (1)
• R6 (size-AA) batteries (2)
• FM antenna adapter (1)
Inserting batteries into the remote
Insert R6 (sizo-AA) batteries with the + and - properly
oriented in the battery compartment. When using the
remote, point it at the remote sensor H on the receiver.
For details, refer to the operating instructions supplied
with your remote.
? When to replace batteries
Under normal conditions, the batteries should last tor about 6
months. When the remote no longer operates the receiver, replace
all batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or lighting
apparatuses. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
Before you get started
• Turn off the power to all components before making
any connections.
• Do not connect the AC power cords until all of the
connections are completed.
• Be sure to make connections firmly to avoid hum and
noise.
• When connecting an audio / video cord, be sure to
match the color-coded pins to the appropriate jacks on
the components: yellow (video) to yellow; white (left,
audio) to white; and red (right, audio) to red.