Canon 802.11g 54M WLAN User Manual

Page 8

Advertising
background image

802.11g 4-Port Wireless LAN Broadband Router

8

2.2.3 Setting Hardware Connection

Follow the steps listed below to install your Router when you have all the information

mentioned above.

Step 1. Power all devices down.

This should include your PCs, Cable or DSL modem and the Router.

Step 2. Connecting a Cable Modem or DSL Modem.

Connect your Cable or DSL modem to the WAN port on the rear panel.

Step 3. Connect the Wireless Router to your PCs.

Connect computers directly to the Router on ports 1~4 on the rear panel. If you

have more than 4 computers need to be connected, connect a hub or a switch

(using its uplink port) and connect additional computers to that device.

Step 4. Power on.

Plug the power cord into the power jack. And power on computers.

Advertising