Connecting your system, Overview, Chapter 3 – Sony SAT-A3 User Manual

Page 11: General recommendations

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Chapter 3

I

Connecting Your System

Read this chapter to set up your DSS receiver for the first time, or to
add or remove audio or video components connected to your system.

Overview

General Recommendations

(SAT-A3 Only)

(SAT-A3 Only)

You can connect the DSS receiver in a variety of configurations. The
answers to the following questions will determine how you hook up
and operate your DSS receiver. For example:

□ Do you have cable TV or a broadcast (terrestrial) TV antenna?

□ What type of connectors do your TV and VCR have: S-VIDEO,

A/V (RCA-type), or RF coaxial?

□ Do you plan to integrate your DSS receiver with your audio or

video system?

Detailed hookup instructions are provided on the pages that follow.
For opfimum audio and video performance, follow these general
recommendations as much as possible when hooking up your
components:

□ If you have an audio or audio/video system, consider integrating

the DSS receiver into a home entertainment configuration to take
advantage of your hi-fi system's audio capabilities.

□ If your TV has an S-VIDEO jack, use it to connect your TV to the

DSS receiver. An S-Video connection provides a better picture than
RCA-type video or RF connections.

□ If your TV does not have an S-VIDEO jack, use your TV's A/V

connectors to connect your components. An A/V connection
provides a better picture and audio when compared to an RF
connection.

□ If you have other Sony components that includeCONTROL-S

jacks, you can connect these components via their CONTROL-S
jacks in order to pass remote control signals between the DSS
receiver and these components. This allows you to hide

components behind cabinet doors.

□ If you have a Sony TV that has the S-Link feature, you can connect

it to the DSS receiver's S-LINK connector to simplify the operation
of your system. Using S-Link, when you turn on the DSS receiver
with the TV's remote control, it automatically turns on the TV and
switches the video input to DSS. When you press the SYSTEM OFF
button on the TV's remote control, it turns off both the TV and the

DSS receiver. (See your TV manual for more defails.)

11

Advertising
This manual is related to the following products: