Sony SLV-420 - Manual (Page 15)

1 Set the RF UNIT switch to CH 3 or CH 4, whichever
channel is not used in your area. If both are used^ set
the switch to either channel.
If you made A/V connections (from page 7), you can
skip this step.
Hookup 4; VCR setup
2
SetNORM/CATVtoNORM:
Press MENU and select
TUNER PRESET.
Set NORM^CATV to NORM
and press EXECUTE.
MENU
TlPi*£R SET/CHECK
► TUNER PRESET
SFT VCR PVic . CHANNELS
CABLE BOX CONTROL
CLOCK SCr
TUNER PRESET CH3
► NORM/CATV • NORM CATV
ALfTO PRESET
MANUAL SET •ADD ERASE
AFT
FINE TUNTNG
•ON OFF
For details, see page 20.
3
Preset the channels into the VCR:
1 Hnd the VCR Plus+ Channel Listing in your program
guide. For details on the VCR Plus+ Channel listing,
see page 26.
2
If the channels in the program guide are different
from the channels that you actually use on your TV,
set the cheinnels that are different as follows:
Hookup 4: VCR Plus-t- channel setup
Press MENU and select
SET VCR Plus+ CHANNELS.
Enter the program guide
channel, then the channel
you use on your TV.
MENU
TIMER SETACMECK
TUNER PRESET
► SET VCR PV». OWWELS
CABLE BOX CONTROL
CLOCK SET
SET VCR Pxit. channels
-Guoe CH TV CH—
25 - A«
PUSH (« KEYS TO SET
PROGRAM GUIDE CH
Oa PUSH EXECUTE TO SEE
VCR PX». CHANNEL UST
For details, see page 27.
Program guide chanitel
Your actual TV channel -
♦
Press EXECUTE.
You are now ready to use your VCR
A Quick reference (back cover) to operations is
provided on the back cover to help you quickly enjoy
the basic functions. These procedures differ slightly
depending on the hookup used. Make a note of which
hookup you used (Hookup 4) so that you can always
follow the correct instructions.
Press MENU and selea
TUNER PRESET.
Select AUTO PRESET
and press EXECUTE.
MENU TUNER PRESET CH3
T imer setaocck NORUtlATV • norm CATV
► TUNER PRESET ► ALfTO PRESET
•ADO ERASE SET VCR Plm. channels manual set
CABLE BOX CONTROL
CLOCK SET
AFT
FINE TLININa
• ON OFF
fc A
---- PLEASE wxn —
_______ --Г T T ^_________
For detailt, see page 20.
Getting Started 15