Sony SLV-420 - Manual (Page 25)

Tips for rformal viewing
?
I
i
Note
• Tap the buttons on the
remote commander lightly.
Do not hold the buttons
down.
• Place the Cable Mouse so that it hangs out over the cable box front.
• Position the cable box away from the VCR.
• Do not place the cable box on top of the VCR.
• Point the remote commander at the VCR, not at the cable box.
• Tap the buttons lightly; do not hold them pressed down.
To check the cable box control setting
1 Press CH+/-on the remote commander. Does the channel indicator
on the cable box change? (Point the remote commander at the VCR,
not at the cable box.)
2 Press alllO number buttons (0 to 9) on the remote commander. Does
the charmel indicator on the cable box change?
If the answer to both 1 and 2 is "yes," you have made the correct setting.
If you cannot get your VCR to control the cable box
✓ Check the position of the Cable Mouse.
/ Place the cable box and VCR away from each other. Do not place the
cable box on top of the VCR.
Try the setup again making sure to use the correct control code. If the
cable box still does not respond you can try other codes.
If your cable box still does not operate with the Cable Mouse, contact
your cable company to see if they can provide you with a compatible
cable box.