Using the time counter – Sony SLV-420 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Notes
• When you insert a tape with
a short tape length such as T-
20, T'30 or a non-standard
commerciaUy available tape,
the remaining tape length
may not be correct.
• The display will not appear
during still mode or slow-
motion playback.
Notes
• When a tape is reinserted,
the counter returns to
"OHOOMOOS."
• The counter will not work on
tape portions with no
recording.
Displaying the remaining tape length and time
counter
Press DISPLAY to turn the display on or off.
The white bar represents the
approximate lerigth of tape remainir>g.
Time counter
Using the time counter
At the point on a tape that you want to find later, press COUNTER
RESET tp reset the counter to "0H(X)M00S." When you rewind or
advance the tape to this point, refer to the counter.
Basic Operations | ^