When the timer settings overlap – Sony SLV-420 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Case 1
Program 1
^
OiSted first) 10:00
10:50
Program 2
(listed next)
Case 2
Program 1
Case 3
Will be cleared
1 1
30
20 seconds
will not be
recorded
10«0
10:50
Program 2
=>
11:40
Will
be cut off
Program 1 lo.'OO
11:30
Program 2,0:45
When the timer settings overlap
The VCR will not record overlapping programs. If any of your timer
settings overlap, change the settings.
Case f;
tf you preset two programs
to start recorrffng at
the
same
time...
The program listed first in the TIMER SET/CHECK menu has
priority over the other program. The timer setting of the lower
priority program will be erased from the TIMER SET/CHECK
menu when the first program begins recording.
C^e2;
If you preset program 2 to start recording at the same hme
you preset program 1 to finish recording...
The last 20 seconds of program 1 will not be recorded because
the VCR will enter recording pause for program 2 before
program 1 is finished.
Case3: If you preset program 2 to start recording before program 1
is finished recording...
Program 2 will start recording before program 1 has finished.
12M
Bask Operations 39