Using the remote commander, Step 2: setting up the remote commander, Inserting the batteries – Sony SLV-420 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2: Setting up the
remote commander
Inserting the batteries
Insert two si
2
e AA (R6) batteries by matching the + and - on the
batteries to the diagram inside the battery compartment.
Notes
• With normal use, the
batteries should last for
approximately three to six
months.
• If you do not use the remote
commander for an extended
period of time, remove the
batteries to avoid possible
damage from battery
leakage.
• E>o not use a new battery
with an old one.
• Do not use different types of
batteries.
Using the remote commander
You can use this remote commander to operate this VCR and a Sony
TV. Buttons on the remote commander marked with a dot (•) can be
used to operate your TV.
Remote sensor
To operate
Set|TV|/rVTR|to
the VCR
VTR and point at the remote sensor on the VCR
a Sony TV
TV and point at the remote sensor on the TV
Getting Started |
5