Sony HT-6500DP User Manual
Sony Home Theater Systems
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HT-6500DP
HOME THEATER SYSTEM
Speakers - Connection and Installation
4-239-992-31(2)
Speaker installation
For best performance, we recommend speaker placement as shown.
See the Operating Instructions for more information.
For greater flexibility in the positioning of the speakers, use the optional WS-FV10C floor stand
(available only in certain countries).
COMPONENT VIDEO HOOKUP
If your TV monitor have COMPONENT VIDEO INPUT jacks, use a component video cord to connect to the
DVD player (DVP-NC655P) for better picture quality.
When you make the component video hookup
• Set SCAN SELECT on the DVD player to “PROGRESSIVE".
• Set your TV's video input to match your selection.
• You do not have to connect the LINE OUT VIDEO 1 jack (on DVD player) to the DVD/LD VIDEO 1 jack (on receiver).
SS-CNP2
Surround
speaker
A
B
Front speakers
Place on both sides of the TV equal distances
apart.
Subwoofer
Can be placed anywhere.
C
D
Center speaker
Place on the top of or below the TV.
Surround speakers
Place right beside or slightly behind your
listening position, and a little higher than
your ears.
Sony Corporation ©2002 Printed in Malaysia