Back panel, Appendix: other information 67 – Sony SAT-B1 User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Back Panel
Connector
Description
Cable Type
SATELLITE IN
Connects to the LNB on the satellite antenna.
RG6 Coaxial
(75-ohm/F-type)
WIDE BAND DATA
AUows you to connect your DSS receiver to new
technologies (such as high-definition television), as they
are introduced. Additional accessories may be required.
Depends on future
applications
CONTROL-S
(IN/OUT)
Allows you to pass on remote control signals to another
Sony infrared-controlled audio or video component.
Control-S mono miniplug
AUDIO (R)/(L)
OUT
Connects your DSS receiver to the right and left audio
inputs of your audio or video component.
Audio (2)
(RCA-type)
VIDEO OUT
Connects your DSS receiver to your TV or VCR's video
input.
Video
(RCA-type)
S-VIDEO OUT
Allows you to connect your DSS receiver directly to your
TV (if your TV has S-VIDEO IN).
S-Video
(4-pin mini DIN)
CH3/CH4 Switch
Determines the TV channel on which programs from the
DSS receiver can be viewed.
UHF/VHF IN
Allows you to connect your DSS receiver to your normal
(terrestrial) TV or cable TV service.
RG59 Coaxial
(75-ohm/F-type)
VHF(SAT)/UHF OUT
Connects to your TV or VCR.
RG59 Coaxial
(75-ohm/F-type)
TEL LINE
Connects your DSS receiver to a telephone jack. This
allows you to order pay-per-view programs using the
remote control.
Telephone (for RJ-11 jack)
AC IN
Connects your DSS receiver to a 120V AC outlet.
AC
Appendix: Other Information 67