Inserting batteries into the remote control, Notes on batteries – Sony SAT-B1 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting Batteries into the Remote Control
.
Before you can use the remote control, you must first insert the
supplied batteries. If you want to use this remote control to operate
your TV or cable box, you must also program the remote, as described
in the Appendix on page 70.
To install the batteries:
1
Push and slide open the battery compartment.
2
Insert two size AA batteries (supplied). Be sure to line up the +
and — on the batteries with the + and — on the battery
compartment.
Notes on Batteries
□ Under normal conditions, batteries will last up to six months. If the
remote control does not operate properly, the batteries might be
worn out. When replacing batteries, replace both of them with new
ones, and do not mix different types of batteries together.
□ When you remove the batteries — to replace them, for example —
any codes you've set may be erased. If this happens, you must
reprogram the remote. See "Programming the Remote" on page 70
for details.
Chapter 1: Introducing the DSS System 7