Using the sleep timer, Recording on a video tape, Я you can freely specify the time – Sony STR-DE725 User Manual
Page 39: Adjustments using the set up button, Atyusting the brightness of the display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording
Using the Sleep Timer
3-
Ф
о
■e
Ф
0
3
<л
Recording on a video tape
You can record from a VCR. a TV. or an LD player using
the receiver. You can also add audio from a variety of
audio sources when editing a video tape. See j^ur VCR
or LD player's instruction manual if you need help.
1
Select the program source to be recorded.
2
Prepare the component for playing.
For example, insert the laser disc you want'to record
into the LD player.
3
Insert a blank video tape into the VCR (VIDEO 1 or
VIDEO 2) for recording.
4
Start recording on the recording VCR, then start
playing the video tape or laser disc you want to
record.
Q You can record the sound from any audio source onto a
video tape while copying from a video tape or laser disc
Locate the point where you want to start recording from another
audio source, select the program source, then start playback. The
audio from that source will be recorded onto the audio track of
the video tape instead of the audio from the original medium.
To resume audio recording from the original medium, select the
video source again.
Note
You cannot record multi channel surround digital signals from a
DVD. etc.
You can set the receiver to turn off automatically at a
specified time.
Press SLEEP while the power is on.
Each time you press SLEEP, the time changes as shown
below.
• 2:00:00 -«■ 1:30:00-* 1.00:00 -► 0:30:00 -► OFF ■
c
J
The display dims after you have specified the time.
Я You can freely specify the time
Press SLEEP first, then specify the time you want using the
cursor buttons
(Л
or
V)
The sleep time changes in 1 minute
intervals. You can specify up to 5 hours.
Я
You can check the time remaining before the receiver turns
off
Press SLEEP. The remaining time appears in the display.
Adjustments Using the SET
UP Button
The SET UP button allows you to make following
adjustments.
Atyusting the brightness of the display
1 Press SET UP repeatedly until "OTHER" appears in
the display.
2
Press the cursor buttons
(A
or
V)
to select
"DIMMER".
3
Press the cursor buttons « or » to select the
brightness level.
You can select any of four brightness levels.
40